unsigned char LED_0F[] = {// 0	 1	  2	   3	4	 5	  6	   7	8	 9	  A	   b	C    d	  E    F    -
    0xC0,0xF9,0xA4,0xB0,0x99,0x92,0x82,0xF8,0x80,0x90,0x8C,0xBF,0xC6,0xA1,0x86,0xFF,0xbf
};
    unsigned char LED[4];	//用于LED的4位显示缓存
    int SCLK = 14;
    int RCLK = 13;
    int DIO = 15; //这里定义了那三个脚
    void setup ()
    {
      pinMode(SCLK,OUTPUT);
      pinMode(RCLK,OUTPUT);
      pinMode(DIO,OUTPUT); //让三个脚都是输出状态
    }
    void loop()
    {
        LED[0]=random(9);
    	LED[1]=random(9);
    	LED[2]=random(9);
    	LED[3]=random(9);
        
    	LED4_Display ();
      
    }
    
    void LED4_Display (void)
    {
    	unsigned char *led_table;          // 查表指针
    	unsigned char i;
    	//显示第1位
    	led_table = LED_0F + LED[0];
    	i = *led_table;
    	LED_OUT(i);			
    	LED_OUT(0x01);		
        digitalWrite(RCLK,LOW);
        digitalWrite(RCLK,HIGH);
        delay(10);
    	//显示第2位
    	led_table = LED_0F + LED[1];
    	i = *led_table;
    	LED_OUT(i);		
    	LED_OUT(0x02);		
        digitalWrite(RCLK,LOW);
        digitalWrite(RCLK,HIGH);
        delay(10);
    	//显示第3位
    	led_table = LED_0F + LED[2];
    	i = *led_table;
    	LED_OUT(i);			
    	LED_OUT(0x04);	
        digitalWrite(RCLK,LOW);
        digitalWrite(RCLK,HIGH);
        delay(10);
    	//显示第4位
    	led_table = LED_0F + LED[3];
    	i = *led_table;
    	LED_OUT(i);			
    	LED_OUT(0x08);		
        digitalWrite(RCLK,LOW);
        digitalWrite(RCLK,HIGH);
        delay(10);
    }
    
void LED_OUT(unsigned char X)
{
    unsigned char i;
    for(i=8;i>=1;i--)
    {
        if (X&0x80) 
            {
                digitalWrite(DIO,HIGH);
                }  
            else 
            {
                digitalWrite(DIO,LOW);
            }
        X<<=1;
            digitalWrite(SCLK,LOW);
            digitalWrite(SCLK,HIGH);
    }
}